I like clamps and would see new ways to attach clams to cock and balls. Please share your favorites.
My ideas attached
Printable View
I like clamps and would see new ways to attach clams to cock and balls. Please share your favorites.
My ideas attached
For clamped and squashed testicles, visit threads 2566 and 1932
Homemade dowel humbler, Vise Grip locked on a ringed testicle, Rubberbands on ringed or wrapped testicles.
The Geezer
Stumbled upon this one today. Enjoy!
http://www.extremefetishzone.com/fet...trbpmuhqb.html
As you can see from my pics, below, I like my nuts squeezed to the point of shape distortion. Although I use a Quick Grip occasionally (smallest size, onto which I have glued 50 cent pieces to broaden the jaw surface) and my homemade dowel humbler, and a set of homemade 3/8" lexan plates for applying constant pressure to my eggs, my favorite clamp is a large locking "C" shaped Vise Grip with an adjustable fine adjusting screw in one handle and lock-release in the other. I have also broadened the jaw surface and coated the broadened surface with a non-slip silicone-rubber glue. Although it is rubber, it is so thin that there's no cushioning effect.
After I ring or wrap a ball to isolate it, back off the adjusting screw so I get a minimal amount of pressure, then I center the jaws on my ball and lock it in place. Sometimes if my pouch of scrotum is too loose I have to get it tighter so the ball doesn't squish around OR I might have to recenter the jaws. After it's locked on and the ball is squeezed, I occasionally tighten the adjusting screw until it's too tight to turn the screw, then I unlock the Vise Grip without allowing the jaws to move, adjust the screw tighter and relock it. It amazes me how tightly I can get the Vise Grip to squeeze my balls. Slight tightening adjustments, little by little is the key. After I've gotten the clamp as tight as I can over 30 to 45 minutes of constant adjustments and rests, my ball is very mushy.
I've also found that I can apply more pressure to one ball than the other. One is quite sensitive and the other one is very squeezable and I get a lot of pleasure from squeezing and clamping it.
Other than truly mechanical clamps, I also like to apply small metal rings at the base of my scrotum then a couple, sometimes on each ball, individually...then I usually apply several lobster-claw rubber bands at least to my less sensitive ball, often a couple on my sensitive ball and sometimes I stretch a band or two over both balls. It's interesting that I can apply more pressure to my sensitive ball when I squeeze them together than if I squeeze it alone.
The Geezer
Scrunt's gota win this one.
More clamping etc.
Some of mine, clothespins and restraints...
Ooooooooh!
Lovely! :)
A close inspection.
I thought I should put this thread back in the mind.
Or maybe we should combine it with a bit of strapon action?
Nice thread :)
10 more turns and were done.
Not sure I'd be able to take this clamp on my finger.
Nice :thumbup
i like this 3d very much
Always like home made equipment versus store bought-----seems you can see & feel the effort moe