Hi Guys.
I'm interesting what do you think about ballbusting tools and equipment eginering?
I'm as engineer can make some thing interesting. Say what do you want to see or have ;)
lways Your's Gerian.
Printable View
Hi Guys.
I'm interesting what do you think about ballbusting tools and equipment eginering?
I'm as engineer can make some thing interesting. Say what do you want to see or have ;)
lways Your's Gerian.
how about a spiked vice?
He-he-he... I think that a lot of guys will be interesting in it... :D
I like what you're thinking! But my ideal would be something that crushes the balls and focuses on that, that doesn't pinch the scrotum skin in a distracting way.Quote:
Originally Posted by justtestingstuff
:jumpsmile
A variable suction can feel fantastic and it can be increased to hellish pain.
A simple jar (Peanut jar or spaghetti sauce jar) with a small tube (aquarium tubing) can be placed in the jar and then pressed to some lubed balls. The suction pulls them in and makes a seal despite the tubing. Hairless is best. The more suction the more pressure it places. Careful not to make em pop. Use caution.
there was something like a slightly spiked vise in one of the BME videos i think...mostly a pair of lexan plates with a bunch of little metal nubs in a checkerboard fashion. Seemed to do the deep ball pain job without too much overt skin pain.
but an automated ball beater kinda like this would be great: http://wakutama.web.fc2.com/w080924.htm
I've been thinking about concepts for Balbusting equipment myself for sometime now but wouldn't have the skills or knowledge of how to put them together, so it's nice to meet someone with a mind for engineering.
My idea goes something along these lines:
Take a machine constructed out of a plastic tube/cylinder to place you cock into. Inside the tube/cylinder would be a rubber cock sheef/sock which provides a suction type effect controled by a hand pump, connected to a air tube (hope this is all making sense so far)
Also included in the device would be 2 metal disks which would both connect to the tube/cylinder. The first disk contains a circular hole which is large enough to place your cock through & place on the base of your shaft, but not large enough to allow for the testicles to slip through.
The first disk would interlock with tube/cylinder leaving your cock inside & attached to the sheef/sock, whilst your balls are left sticking out underneath the tube/cylinder through the hole. Now we take a second disk without holes this time which sits on 2 poles attached to the outside of the tube/cylinder which would somehow be attached to the hand pump & air tube.
Now the entire idea behind my device is that everytime the hand pump is pulled, a strong force of suction is applied to the sheef/sock within which the cock is place & in turn providing a blow-job type of effect. At the same time as this is happening, the 2 second disk which is attached to the poles slowly moves up inch by inch with every pump which would slowly crush the mans testicles bit by bit.
Like I said it's always been just an idea, but imagine the fun women could have with their boyfriends/husbands using this device, hands tied behind their back, completely helpless & just left in suspense wondering how far their women is going to go this time???:Baahaha:
Hi guys!
Here you can send your draws and pictures of your tools and I as engineer can design it...
;)
Regards, Gerian
Markerbull,
This is interesting. Can you explain more how it works? My boyfriend loves a lot of suction pressure and it's hard to keep it up while I do other things. I would love to be able to do more things at once like use a crop.
I´m thinking about an equipment that squeezes with full force the balls.
I love ball squeeze!
Dear caratball vbmenu_register("postmenu_56309", true);
Decribe me How you image this equipment and what do you want to feel and I'll think what can I do. ;)
I've designed a BallBusting machine that is simple, powerful and you can make it with parts that you may have, or any hardware store stocks.
This machine is adjustable to give as hard a smack to your ballz as you can stand. Or as lite as you want.
http://cdn63.xtube.com/e5/photos/200...lAAFtaqdIk.jpg
What you need;
1 hinge
2 rollers
loop bungee cords
1 foot 2X4 with 1" channel on bottom for rope to run thru
2'X2' base
rope
heavy duty hose
a few screws
Just squat over this with ballz hanging, pull the rope and let go of the rope. This thing can really make your ballz fly.
Or, sit in chair, put this machine in front of you, pull rope, let go, and smash your ballz thata way.
Any questions?
Hi, this sort of thing is very easy to make,
http://fapomatic.com/show.php?loc=0846&f=clamp.jpg
These are widely available on the net but are not cheap. Make your own in under an hour for next to nothing. Part A is the fixed part, the threaded rods would be held in place by nuts. Part B will move along the horizontal rods and when done up will hold the fellas in place. Part C is the clamp that moves up and down along the vertical rods. You can use extra nuts between A & B as spacers. Piece of cake.
J :)
Something like this:
http://wakutama.web.fc2.com/w080623.jpg
Well...
I think it's possible to make it...
1. variant with vacuum
2. Mecanical with spreaching
3. Mecanical with trampling
4. Mecanical with streaching and trampling
But Need decide the presure...
I've thought about devices girls could use as part of a game. I've posted one before with a presentation included call wheel of misfortune.
I'd like to see a device shoot balls and the ladies use this gun to target men's balls for points. One possibility would be a type of air gun made from PVC pipe that shoots a racket ball.
Quote:
Originally Posted by funballz
Good machine. I'm looking to buy a balllbusting machine for my balls. I would like a machine who can give me the feeling of a very hard kick in the nuts.
Hi guys
I saw You sent here nice one... I've designed it nt from human power but permanent working mechanical but I don't use a lot of power I don't need kill balls just bust long time and hard... ;)
Our ballcrusher.
This is more funny than erotic but loled so hard and it had a ballkicking robot, Mr. Ballsmatron.
Merel, I like the simplicity of your ball busting device. Sometimes we get too sophisticated in our creativity that we forget the purpose of the device. Well done.!!
The best device ever designed or made is a woman's hand!
Exactly :bananajumQuote:
Originally Posted by jeenie123
Maybe that hand gets fatigued and wants to switch on a mechanical device.
Time for a bump.
Here is mine, can you tell how it works? :D
Attachment 20951Attachment 20952
Wow! I can! Looks like some comprehensive solo play. Does a partner ever use it on you?Quote:
Originally Posted by raymondmarble
Looks like a solid thump and hold.
I have an urge to try it.
Not yet, but I do have a couple of domme friends, so maybe one day :)Quote:
Originally Posted by vela73
Yeah, the first hit is not as bad as you expect it to be, but the 2nd and 3rd really start to hurt a lot.Quote:
Originally Posted by Alec Anaconda, A1
Thanks folks! The hard part is setting it off. You can't just pull the pin because you know its coming and it takes a strange amount of courage to do it. I either tie the pin to a self closing drawer, then its impossible to predict when the weight of the drawer will pull it. Or better, I tie the pin to my foot and hold my foot up under my chair. It doesn't take long for fatigue to set in and as my foot drops, it pulls the pin. All good fun :D
CBT with Spanking Machine painful orgasm
M with assistant, 11:57
I assume:
Assistant is female
Man is gagged and bound
Speed is controlled by his helper.
Shows machine slapping balls of man, until ejaculation (helped by assistant). Slapping continues for POT.
https://www.pornhub.com/view_video.p...h61918898042ec