I tried this on myself a few days ago.
Nice one broken Now let see if you can ride a bicyle for 10K with that gear on
some useful devices from the cellar. No really flat but at least a try.
This is just a crazy little fantasy I dreamed up one day while sitting in traffic.
A car eazed up along side me and there was a gorgeous young lady driving and looking as bored as I was.
I thought how good it would feel to be busted by her. Then I started thinking of how she could do it while driving. It would be a great idea to build a custom BB driver seat. It would flip up to allow me to lay on the floor under the seat, on my back with my face sticking out near her feet. The bottom of the seat would be spring loaded so that her weight would rest on my chest and abdomen. Then my balls would be held in place between two plates, one stationary and one moveable. The moveable plate would be connected through spring loaded mechanical linkage to the brake pedal. The spring loaded portion of the linkage would be there so as not to completely crush my balls but allow extreme pressure applied depending on how hard she stepped on the brake pedal.
So...there I am watching her car move up ahead in traffic and every time I see her brake lights come on I imagine the crushing pressure applied to my balls by her foot. Suddenly my jeans got very tight and uncomfortable. But it sure made the drive in traffic much more bearable!!!
bcurt
Has anyone tried a blood pressure cuff on balls? It sounds good but i imagine they would pop out of the cuff...
YesOriginally Posted by funporn
see: http://femaledom.com/forum/showthrea...light=pressure and play safely
great pics and excelletn quality. tks
I have just found a little gadget that might be useful: "trick eggs". They look like real chicken eggs but are soft on the outside and have a hard core. In short: they have the feel of a real ball if you squeeze them, they have nearly the same size and the same weight. Just take two and put them in a little bag, and let your girlfriend grab and squeeze - for training. Or put them in your trousers without telling and brag how much you can take
Bought them in Cologne, Germany. Label reads: Fernost Importe Geiss GmbH
When I need a good ball busting I usually look for simple things around the house/garage. I could buy/make something good, but I can't have devices laying around for anyone to find. My best find so far is my $3 walmart caulking gun. I guess you would need two to go get both nuts, but this device has perfect pressure control. I have tried a few guns, but this cheap one works the best so far. It will apply pressure with no pinching of the scrotum. There are a lot of good looking devices you can buy/make, but from what I have seen they use wingnuts for adjusting pressure, and I find the trigger control to be the best part. Masturbating for a long period of time, gradually getting tighter and tighter. Just before orgasm, squeezing even harder to overcome the pain tolerance brings me some of the greatest orgasms I could ever imagine. My second favorite is the old wooden toilet seat. This takes a bit of work though, to get the aim dead on at the perfect time. Controlling the amount of pain with this method is difficult, but sometimes just laying my balls on the cold toilet bowl is enough to get me off. Anyone else have some favorites around the house?
Take two pieces of 3/4" plastic pipe. Secure the ends to wooden "horses", balls between them with me standing. They are strong enough to hold my balls firmly but if I give a painful tug, they will pop out with quite a burst of pain. My wife then takes one of these extruded foam "noodles" - about 2" thick, 6 ft long that we bought at Toys-R-Us. Swings hard aiming for my balls. Most times she misses. When she connects it really gets my attention; however I must try to stay standing because falling down will give me considerable pain before my nuts slip out between the pipes. We place a bet of some kind and she gets so many swings (depending on the bet). If after so many swings, my balls are still between the pipes, I win. If they fall out or are knocked out by a solid swing, I lose.
If she swings horizontal, she misses a lot but sometimes the force of the blow itself will push may balls through. If she swings with a downward stroke, she connects more often but most blows lose some of their energy hitting the plastic pipes or deflecting off by stomach.
The other is to secure the pipes low on the wooden horses and I am in standard "humbler" position. I never bet for higher than 5 swings in this position. Not only does it hurt more per swing and accuracy is better, I just cannot hold as still in this position.
If we are not betting, then she may use a piece of 3/8" Quest tubing as her whip. Great thing about this is when disassembled, nothing is special. Just looks like ordinary stuff.
One I want to try when my wife is out of town on business. Use the same plastic pipes. Tie a rope at each end and connect this rope to a electric wench on slow. Tie my hands with a 6 foot piece of rope to a pole that I cannot reach until after the pipes pull off my balls. Start the wench. As it tightens, it pulls little by little. At first the slack is taken up in the rope, then the wench slowly flexes the pipe until there is enough pressure to pull the pipes free of my balls. Slow creshendo pain building to an inevitable peak the "pop" my balls squeeze through the pipes. The first time I will probably try this with her around so she can get me out if needed.
Again, when torn down, nothing special other than sore balls.
How much force it takes depends on how close to my balls the pipes are tied together. At 10 feet, they come off only mildly painfully. At 2 feet, I would worry about damage before release.
Remember, Safe Sane Consensual.